Debouncing

Overview

Debouncing is the technique of detecting and removing multiple state changes from a hardware device (most commonly a push-button switch) caused when the mechanical contacts touch. Because of tiny imperfections in switch contacts, as the contacts come together and make a conductive circuit, the actual resistance jumps up and down multiple times in quick succession (this is the bouncing). Although the human eye cannot see this when a light is turned on in a house, this bouncing can cause problems for logic which is expecting a single state tradition (e.g. a microcontroller which is counting button presses).

Hardware Debouncing

A schmitt trigger can be used to avoid “grey areas” of digital logic.

Firmware Debouncing

Another way to debounce inputs is to use firmware. Assuming the button is connected to the input of a microcontroller, it is normally simpler, cheaper, and easier to do the debouncing in firmware than hardware.

External Resources

The Ganssle group, A Guide To Debouncing, is an awesome, in-depth investigation into switch debouncing. If you are reading up on this topic, it is a must see!